background image

3

CARE AND USE/INSTALLATION

NOTE

NOTE

!

CAUTION

Important Safety Instructions

Warnings and safety instructions appearing in this guide are not meant to cover all possible conditions and situations that 

may occur. Common sense, caution, and care must be exercised when installing, maintaining, or operating this appliance.

Recognize Safety Symbols, 

Words, and Labels.

CAUTION-

Hazards or unsafe practices which could

result in personal injury or property / product damage.

NOTE-

Important information to help assure a problem

free installation and operation.

!

WARNING

EXCESSIVE WEIGHT HAZARD

Use two or more people to move product.

Failure to do so can result in personal injury.

Remove Interior Packaging

Your appliance has been packed for shipment with all parts 

that could be damaged by movement securely fastened.  

Remove internal packing materials and any tape holding 

internal components in place. The owners manual is 

shipped inside the product in a plastic bag along with the 

warranty registration card, and other accessory items. 

Important

Keep your carton and packaging until your appliance 

has been thoroughly inspected and found to be in good 

condition. If there is damage, the packaging will be needed 

as proof of damage in transit. Afterwards please dispose of 

all items responsibly. 

Note to Customer

This merchandise was carefully packed and thoroughly 

inspected before leaving our plant. Responsibility for its 

safe delivery was assumed by the retailer upon acceptance 

of the shipment. Claims for loss or damage sustained in 

transit must be made to the retailer.

DO NOT RETURN DAMAGED MERCHANDISE TO THE 

MANUFACTURER - FILE THE CLAIM WITH THE 

RETAILER.

SAFETY INFORMATION AND UNPACKING YOUR APPLIANCE

!

WARNING

WARNING - 

You can be killed or seriously injured

if you do not follow these instructions.

!

WARNING

WARNING - 

Dispose of the plastic bags which can

be a suffocation hazard.

!

WARNING

State of California Proposition 65 Warning:

This product contains one or more chemicals known 

to the State of California to cause cancer.

!

WARNING

State of California Proposition 65 Warning:

This product contains one or more chemicals known 

to the State of California to cause birth defects or 

other reproductive harm.

Summary of Contents for LN15ICER





























Reviews: