Lynx 6900 FCE, Owner'S Manual

Page: 156 / 183

36 _____________________________________________ OPERATOR’S MANUAL
ENGLISH
Lock pin
Drive belt removal
IMPORTANT ! A new belt requires at least a 25 km’s break-in period before it can be
loaded in full.
WARNING!
Engine should be running ONLY when belt guard and/or pulley guard is secured in
place. Never run the éngine without drive belt installed. Running an unloaded engine
can prove to be dangerous.
Forest Fox model: When replacing new drive belt notice that belt is right assembled on
driven pulley, especially under the pulley. We recommend to use driven pulley opening
tool, which is found in toolbox.
DRIVE PULLEY, ADJUST AND SERVICE
Pulleys, especially drive pulleys, function is very important for snowmobiles function and
performance. Malfunction and wrong calibration in pulleys decreases the performance of
the snowmobile. Regular maintenance (cleaning, replacing worn parts) and control keeps
pulleys in good function.
NOTE: Oil looses teflon coating of bearing.
NOTE: Oil causes fiber swelling and bushing sticking.