MOUNTING THE 200W LED BAR TO THE BAR BRACKET
1. Remove the cap on the end of the slot. Insert the two included 1/4" hex bolts into
the slots.
2. Lift the 200w LED Bar and hex bolts up through the appropriate notch and
hole in the Bar Bracket. Tighten down the wing nut to secure it in place.
BAR BRACKET INSTALLATION TIPS
•
Determine how many power cords you will need based on how many 200w LED Bars you can daisy chain together. This is determined by the power cable you
select that is rated for your electrical systems voltage.
•
Plan out how you want to daisy chain your 200w LED Bars in your room to determine where the power cables need to go.
•
You can daisy chain each 200w LED Bar left to right or you can go up and down along your room.
•
Use the Unistrut cleat included with the Bar Bracket to give you clearance around Unistrut splice plates and hardware. The Unistrut cleat also helps keep each Bar
Bracket perpendicular to the Unistrut.
•
Zip tie extra cable to the Bar Bracket after installation is complete.
Summary of Contents for LUX-200-277-90
Page 1: ...200w LED BAR LUX 200 277 90 USER MANUAL ...
Page 8: ......
