![background image](http://html1.mh-extra.com/html/principal-led/street-wrap-flex-back-bend/street-wrap-flex-back-bend_product-manual_1603100001.webp)
1
2
CUTTING AND CONNECTION
Installation Tools
1. Silicone Insert
2. Silicone End Cap
3. Silicone Glue
4. Pipe Cutter
Instructions for Cutting and Connection
STREET WRAP™ FLEX
BACK-BEND
PRODUCT GUIDE
1. Cut on the designated cut mark.
2. Clean cut end before next steps.
3. Install silicone insert after cut.
4. Apply silicone glue to silicone end
cap, making sure that the cut section
is completely sealed.