ORBEON INSTALLATION INSTRUCTIONS
READ THOROUGHLY BEFORE INSTALLING
WARNING! Fixtures must be grounded and installed in accordance with the National Electrical Cole and all local
codes. Failure to do so may increase the RISK OF PERSONAL INJURY, PROPERTY DAMAGE, FIRE AND DEATH.
Install and use so fixture failures do not cause a hazard and use only in environments for which the product is
specifically marked.
WARNING! This product contains chemicals know to the State of California to cause cancer, birth defects, and/
or other reproductive harm. Thoroughly wash hands after installing, handling, cleaning, or otherwise touching this
product.
CAUTION! Follow ALL luminaire and control recommendations, product markings, instructions, restrictions and
warnings regarding luminaire operation and burning position. Luminaire label shows electrical and environmental
requirements and restrictions.
All electrical work must be done by a qualified electrician.
Turn off electric power to all affected circuits and allow to cool before servicing.
Carefully read these instructions before installing product. If you do not understand these instructions, before starting
any work, contact your Hubbell Lighting distributor or [email protected] or (864) 678-1000.
Give instructions to facility owner/manager for future reference.
INSTALLATION INSTRUCTIONS FOR ORBEON CEILING MOUNTED LED LUMINAIRE
CAUTION HIGH VOLTAGE
LIGHT FIXTURES AND WIRING SHOULD BE SERVICED BY A QUALIFIED ELECTRICIAN
