2. Make sure the hex bolt is seated between
the two small vertical ribs in the Bar Bracket.
3. Insert the Unistrut cleat over the hex bolt.
5. Make sure the Unistrut cleat is seated properly
between the gap in the bottom of the Unistrut.
4. Lift the Bar Bracket, hex bolt and Unistrut cleat
up through the slot in the Unistrut.
MOUNTING A 400W OR 800W SYSTEM
4. S
tart by inserting the 1/4" x 3.5" hex bolt
through the bottom of the Bar Bracket.
6. Place the fender washer and wing nut over the
hex bolt and tighten them down.
Summary of Contents for LUX-200-277-90
Page 1: ...200w LED BAR LUX 200 277 90 USER MANUAL ...
Page 8: ......
