Luxul XMS-1024, User Manual

Page: 34 / 40

User Guide
34 © Copyright 2013 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
5.12.5 IP Configuration
„
DHCP„Client:„Enables„or„disables„the„DHCP„client.„It„is„disabled„by„default.„
„ „
IP Address: „Sets„the„login„IP„address„of„the„switch„(192.168.0.2„by„default)
„ „
Subnet Mask: Sets„the„subnet„mask„of„the„switch„(255.255.255.0„by„default)
„
„
Gateway:
Sets„the„gateway„of„the„switch„(0.0.0.0„by„default)
„ „
Management VLAN:
Selects„the„VLAN„of„the„management„computer„
„
NOTE:
„„ If„the„Management„VLAN„is„not„setup„properly,„you„will„not„be„
able„to„manage„the„switch.
„
CAUTION: „„ After„enabling„the„DHCP„client,„you„must„check„for„the„IP„
address„obtained„from„the„DHCP„server„(usually„a„router„or„
sever„in„the„network)„and„then„re-connect„to„the„switch.„It„is„
not„recommended„to„use„this„function.„
5.12.6 MAC Aging Configuration
„
The„default„MAC„address„aging„time„is„300„seconds.„The„set„value„should„be„
between„10„seconds„and„65535„seconds.„Otherwise,„the„system„will„report„an„error.„
If„“ARL„Aging”„is„left„unchecked,„the„system„terminates„MAC„address„aging„(not„
recommended).„