Luxul XMS-1024, User Manual

Page: 12 / 40

User Guide
12 © Copyright 2013 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
CHAPTER:5 CoNFIGURATIoN
This„section„introduces„the„configuration„of„the„XMS-1024„Gigabit„Ethernet„Smart„
Switch„functions„via„the„XenSmart™„Web-based„management„interface.
„
5.1 Login
„
5.2 Status
„
5.3 Port Settings
„
5.4 Mirror
„
5.5 VLAN
„
5.6 Trunk
„
5.7 QoS
„
5.8 Mac Settings
„
5.9 802.1X
„
5.10 RSTP
„
5.11 IGMP Snooping
„
5.12 System
5.1 Login
The„XMS-1024„is„not„equipped„with„internal„DHCP„server.„However,„if„your„switch„is„
connected„to„the„the„XBR-2300„Enterprise„Dual-WAN„Router,„configuration„will„be„
automatic.„Otherwise,„the„IP„address„of„the„computer„for„login„and„configuration„
will„need„to„be„manually„configured.„The„table„below„lists„the„default„parameters„
of„the„XMS-1024.„
Parameter: Default Value
Default„IP„address: 192.168.0.2
Default„user„name:„ admin
Default„password: admin
Login to the switch with the following steps:
1.„ Plug„an„Ethernet„cable„into„any„of„the„ports„of„the„switch
2.„Plug„the„other„end„into„the„Ethernet„port„of„your„computer„
3.„Power„on„the„switch
4.„Check„to„see„that„the„IP„address„of„the„computer„is„within„this„network„segment:„
192.168.0.xxx„(“xxx”„ranges„100~254).„For„example,„192.168.0.100.„For„IP„address„
settings,„refer„to„Appendix„3.„
5.„Open„the„Web„browser,„and„enter„192.168.0.2.„The„switch„login„window„appears,„
as„shown„below.„
6.„Enter„the„user„name„and„password„(default„user„name„and„default„password„are„
both„set„as„“admin”),„and„then„click„“OK”„to„login„to„the„switch„configuration„
window.