Luxul XMS-1024, User Manual

Page: 31 / 40

luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460
User Guide
31
5.11.2 Snooping Status
„
IGMP„Status:„Displays„the„multicast„snooping„options„configured„by„VLAN.„When„
the„multicast„table„is„not„established,„“Querier”„displays„“Idle”.„When„the„XMS-1024„
snoops„into„a„multicast„message,„“Querier”„displays„“Active”„and„the„values„in„
“Queries„transmitted”„and„“Queries„received”„will„begin„to„be„displayed.„The„values„
in„“V1„Reports”,„“V2„Reports”„and„“V3„Reports”„shows„the„version„of„the„multicast„
messages„received.„If„a„message„is„of„V2„and„a„device„in„the„multicast„table„wants„
to„leave„the„multicast„group,„the„leave„message„is„transmitted„in„V2„format.„
„ „
Refresh: „Manually„refreshes„the„current„port„status„
„
NOTE: „This„page„does„not„dynamically„refresh„itself
5.12 System
„
5.12.1 SNMP
„
5.12.2 Change Password
„
5.12.3 Power Save
„
5.12.4 Upgrade
„
5.12.5 IP Configuration
„
5.12.6 MAC Aging
Configuration
„
5.12.7 Restore Factory
Defaults
„
5.12.8 Backup
„
5.12.9 Restore
„
5.12.10 Logout
5.12.1 SNMP
„
All„management„information„and„counters„are„stored„in„the„Management„