Luxul XMS-1024, User Manual

Page: 10 / 40

User Guide
10 © Copyright 2013 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
„ „
Make„sure„there„is„adequate„space„around„the„XMS-1024„for„adequate„ventila-
tion„and„proper„heat„dissipation.„It„is„recommended„to„have„at„least„4-6„inches„
around„all„sides.
„
„
Do„not„place„heavy„articles„on„the„XMS-1024.
„ „
Power„outlets„should„be„within„5„feet„of„the„XMS-1024.
„ „
Verify„the„ground„connection„of„the„outlet„is„functioning„properly.
„ „
Check„the„power„cord„to„confirm„a„secure„connection.
„ „
Avoid„placement„in„direct„sunlight.
„
„
When„installing„the„XMS-1024„on„a„flat„surface,„attach„the„rubber„feet„to„the„
bottom„of„the„device„to„avoid„scratching„the„surface.„
4: XMS-1024 INSTALLATIoN
4.1 Installing the XMS-1024 in a Rack
The„XMS-1024„can„easily„be„installed„in„a„standard„19”„rack.„The„XMS-1024„includes„two„
mounting„ears„for„installing„and„stabilizing„the„switch.„For„attaching„the„mounting„ears„
and„installing„the„switch„within„a„rack,„please„refer„to„the„following„illustration:
Rack-Mounting the XMS-1024
„ „
„Using„the„included„screws,„attach„the„mounting„ears„to„each„side„of„the„switch.
„ „
„Mount„the„switch„in„the„rack„with„the„LEDs„facing„outwards.„Be„sure„the„switch„is„
level„and„properly„secured„within„the„rack.„
4.2 Desktop Setup
For„use„as„a„desktop„device,„position„and„apply„the„included„rubber„feet„to„the„
bottom„of„the„XMS-1024.„