33
Manuel_VS450Z18/VS450WZ18_V02_En
1.
Press
MENU
=> SCREEN => ZONE TITLE
to display zone title menu on the
monitor.
2.
Select the zone number by moving the
Joystick
up or down. Select Start,
End or number column to be set by moving the handle to the right or left.
The selected column will be highlighted.
3.
Twist the joystick handle on the No. column to enter zone title. Select
alphanumeric characters by rotating the handle. Move to the next
character by moving the
Joystick
to the right. To finish entering the title,
move the
Joystick
down.
4.
To adjust panning limit, press the
SHFT/PGM
key and hold down. Then use
the
Joystick
to go the desired direction. The end limit must be in an
increasing direction. (Start < End). (Or twist the zoom handle or hit the zoom
button to start PTZ control for view selection and hit the Focus button to exit
from control mode.)
5.
PREV NEXT: Go to previous page or next page of the menu
6.
Save and exit the program by moving the
Joystick
to the right. Press ESC to
exit the program without saving.
3.2.5 CAMERA
TITLE
(
MENU
=> SCREEN => CAMERA TITLE)
Move the joystick handle to the right to select CAMERA TITLE options.
This function allows the users to set the title of camera as well as the usage of on
screen display of the title.
1.
Twist the joystick handle on the TITLE: CAMERA NO to enter camera title.
Select alphanumeric characters by rotating the handle. Move to the next
character by moving the
Joystick
to the right. To finish entering the title,
move the
Joystick
down.
CAMERA TITLE
TITLE: CAM
No
DISPLAY: ON
POSITION: ON
SAVE AND EXIT
