9
MAC - Primary Software Functions
Inspect, Unlock Door Only
Choose this function when you need
to access
a compartment
without disabling/resetting a
user-created passcode.
Enter your inspection password in the
“
Inspection Password
” field (default code
is 12345678).
Click “
Run
” to open the compartment.
Close the door when finished inspecting the
compartment (the compartment will
re-lock, and the user-created passcode will
still be active).
1.
2.
3.
1
2
Run
Door Unlock and Code Clearing
Choose this function when you need
to disable/reset a user-created passcode
and
make the compartment available for a new user.
Enter your reset password in the “
Reset Password
”
field (default code is 12345678).
Click “
Run
” to open the compartment and reset
the user-created passcode.
Close the door when finished inspecting the
compartment (the compartment will latch shut, and the door can be re-opened by
pressing the unlock button on the corresponding keypad).
1.
2.
3.
RUN
1
2
Inspection Password Setting
4.
3.
1.
2.
Choose this function if you wish
to change the
inspection password
to another password of your
choosing (it can be set to match or be different
than the reset password).
Enter your current inspection password in the
“
Current Inspection Password
” field (if one has
never been set, the default password is 12345678).
Enter a new inspection password in the
“
New Inspection Password
” field (up to 8 digits).
Re-enter the new inspection password in the “
Confirm Inspection Password
” field.
Click “
Run
” (a “Successful” message will pop up if the code was successfully reset).
4
1
2
3
