Quick Start Instructions
1
To Power Up:
Insert the female end of the power cord into the
power cord connection on the rear of the locker.
Plug the male end of the power cord into an
available outlet.
Lights on the keypads will illuminate to indicate
the locker has power.
1.
2.
3.
To Store, Charge, and Lock an Item:
Press the unlock button on any keypad.
Open the door next to the keypad.
Place item(s) into the open compartment.
Plug item(s) into the USB port and/or
AC outlet as needed.
Close the door.
When the door lock status indicator blinks
green, enter a
4-digit PIN
of your choice.
1.
4.
5.
6.
2.
3.
Enter your
4-digit PIN
on the keypad next to the
locked compartment you wish to access.
Press the unlock button.
Open the door.
To Unlock a Stored Item:
1.
2.
3.
NOTE:
If a PIN is forgotten, administrator access will be needed to open the compartment.
NOTE:
A)
If the door lock status indicator shows solid
green, press the unlock button and repeat step 6.
B)
If the door lock status button continues to blink
green after entering a PIN, press the lock button.
C)
If the door is successfully locked, the door lock
status indicator will show solid red.
3
1
2
4
5
