![background image](http://html1.mh-extra.com/html/luxor/lbv-3/lbv-3_installation-and-owners-manual_1952566015.webp)
Log Installation
Distribute vermiculite evenly over
the burner. Spread it near and
around the flame holes, but do not
block any of them.
Place large log segment on the
burner using locating device
attached to the burner.
The second segment is to sit on the
small shelf at the rear of the firebox
while leaning the burnt end up on
the first segment as shown.
Lean the third segment against the
top of the second segment, while
resting the bottom in the locator on
the burner.
Make certain that none of the fire
holes or the pilot are blocked while
installing the log set.
Logs are
brittle and easily damaged.
Handle with care.
Page 13