Door Fitting
Page 9
WARNING: Do not abuse the appliance’s glass by striking, slamming or similar trauma. Do not use the
appliance with the door removed, glass panel cracked or broken. Only use glass approved for use with
this heater. Do not use substitute materials. Replacement of the panel should only be carried out by a
licensed qualified service person. .
Window Removal
•
Open bottom grill assembly.
•
Open the two clasps located on bottom of firebox floor.
•
Lift out the bottom of the door and slightly lift door to unhook assembly from the top clips.
Window Replacement
•
Locate the top door channel over the top firebox relief brackets.
•
Locate the bottom two clasps and close clasps.
•
Pull the top of the window forward and release to check that the it opens
slightly and returns in the
event of delayed ignition.
If glass breaks, remove all broken glass inside fireplace.
To install the glass, simple hold at a 45 degree angle and line up the groves as
shown above. Do not force. Once in the groves, the door should simply close
down into place.
Once the door closes against the insert,
simply lock the clips firmly into place. Again,
do not force the door. All parts are crafted to
fit into place with proper installation.
