7 | 20
2.1 hazard warnings
+
Installation may only be performed by specialists.
+
Keep children away from the system during the
transport and installation of the mechanical and
electrical components.
+
Installers are liable themselves for the entire
risk with regard to accidents and injuries during
installation, including but not restricted to injuries
caused by electric shock.
+
Please adhere to the safety instructions for working
with direct current.
+
A single module can generate direct current volt-
ages of more then 30 volts in direct sunlight. In
case of series connection of the modules, the total
voltage corresponds with the total of the individual
module voltages. If the modules are connected in
parallel, the total current strength corresponds with
the total of the current strengths of the individual
modules. Even contact with a direct current voltage
safEty
instruCtions
of 30 volts or higher is potentially dangerous.
+
Never disconnect the module under load. Before
working on the PV system, disconnect the AC and
DC inverter circuits.
+
Cover the module fully with a non-transparent
material during installation to avoid the generation
of current.
+
Only use insulated tools approved for working on
electrical equipment. Do not insert any electrically
conducting parts into the ports of the modules.
+
Do not carry out any work on the PV system in
case of wet weather conditions or strong winds.
+
Use proper fall arrest systems on the roof.
+
Adhere to the safety regulations for all other
components used in the system including cables,
plugs, charge controllers, inverters, accumulator
batteries, rechargeable batteries etc.
Summary of Contents for eco line 60/225-235W
Page 1: ...ECo line Modules correctly mounted...
Page 2: ...Table of contents...
