2.2 warning of MatErial daMagE
+
The proper conception of the rack is the responsi-
bility of the system designers and installers.
+
Never short-circuit the modules.
+
Only use equipment, connections, cables and
racks suitable for an electric solar system.
+
Always use the same type of module within a
certain PV system.
+
Do not use defective or damaged modules.
+
Do not attempt to disassemble the module, and do
not remove any of the existing identification labels
or components from the module.
+
No colouring agents or adhesives may be applied to
the top surface of the module.
+
Do not use any mirrors or other magnifying
equipment to artificially concentrate the sunlight
onto the modules.
+
Do not expose the rear film to direct sunlight.
+
Do not use the module near equipment or in places
where flammable gases are generated or may
accumulate.
+
Do not drill any additional mounting holes in the
module frames. The guarantee becomes null and
void in case of infringement.
+
Do not attempt to drill any holes in the glass sur-
face of the modules. The guarantee becomes null
and void in case of infringement.
+
Do not lift the module by the junction box or the
electrical cables.
+
Do not stand on or step onto the module. Do not
place any heavy objects on the module.
+
Avoid dropping the module and do not set it down
jerkily. Prevent objects from falling onto the mod-
ule.
+
When installing the system you must adhere to all
local, regional and national ordinances. If applica-
ble, apply for a building permit.
!
Summary of Contents for eco line 60/225-235W
Page 1: ...ECo line Modules correctly mounted...
Page 2: ...Table of contents...
