![background image](http://html1.mh-extra.com/html/luxor/44799/44799_manual_1952589006.webp)
6
SVENSKA
ENGLISH
Over
temperature
shut down
Error code
“E2”
Green on, red on Yes
No
Stop using. Cool down
the inverter and wait
for the temperature to
drop before using.
Output short
circuit
Error code
“E4”
Green on, red on Yes
No
Stop using. Check the
connecting cables and
loads. Restart after
troubleshooting.
Safety information
Do not expose the inverter to rain, snow, spray or dust. Keep the inverter at a temperature between -15 °C
and 35 °C to not affect the output efficiency.
Make sure the wires are all in good condition. Do not use damaged cable since this can lead to a fire hazard
or electric shock. Do not use under dimensioned cables. Do not use cables thinner than 22 mm
2
.
To prevent fire or explosion do not install the converter in areas containing batteries or flammable materials
or in a location which require ignition protected equipment.
Take these precautions when working with the inverter:
•
Remove watches, rings and other metal objects.
•
Use tools with insulated handles.
•
Wear rubber gloves and boots.
Do not use the inverter near water or in excessive humidity. Keep the inverter at a humidity level of 10~
95% RH.
Do not use the inverter close to combustible gas or fire.
Do not open or disassemble the inverter. If the inverter needs repairing, always turn to a professional.
Do not drop metal tools on the inverter. This may cause a short-circuit on the connected electonics.
Use the inverter in well-ventilated areas. Do not block the front air vents or the rear air exhaust. Make sure
the fan axis is always horizontal.
Do not operate appliances that may feed power back into the inverter.
To keep a long lifespan of the inverter, the recommended load power is within 85% of the rated output
power of the inverter.
The outlets are not grounded.