LX120
V. 05 – 23/07/2014
3
©Velleman nv
Familiarise yourself with the functions of the device before actually using it. Do not allow operation by
unqualified people. Any damage that may occur will most probably be due to unprofessional use of the
device.
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to
the device is not covered by the warranty.
Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks,
lamp explosion, crash, etc. Using the device in an unauthorised way will void the warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the
dealer will not accept responsibility for any ensuing defects or problems.
Mechanical wear and LEDs are not covered by warranty.
A qualified technician should install and service this device.
Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the
device against damage by leaving it switched off until it has reached room temperature.
This device is designed for professional use on stage, in discos, theatres, etc.
Use the appropriate power supply (see Technical Specifications below).
Lighting effects are not designed for permanent operation: regular operation breaks will prolong their lives.
Use the original packaging if the device is to be transported.
Keep this manual for future reference.
4.
Features
strong die-cast housing
Kling-Net/Art-Net support allows auto-configuration over Ethernet
with bracket for rigging; connection hardware available
auto mode via built-in programs with speed adjustment
master/slave mode for synchronized operation of multiple units linked in a chain
flicker-free operation (400 Hz)
DMX controlled via 5, 49, or 54 channels◦5 channel mode: dimmer, strobe, auto mode, auto mode speed,
dimmer curve
o
49 channel mode: dimmer control for each pixel
o
54 channel mode: dimmer control for each pixel + master dimmer, dimmer curve, shutter, auto mode,
and auto mode speed
clear LCD display for easy operation
power supply via powerCON, linkable
optional bracket: LX121
5.
Overview
6.
Protocols
Kling-Net
ArKaos has designed the Kling-Net protocol to allow the distribution of real-time video data to remote
display devices, such as LEDs or LED panels, over Ethernet.
Kling-Net allows auto configuration of display devices using an etherCON® RJ 45 Ethernet connection.
The device works best with the Arkaos Mediamaster™ Pro software and its Video Mapper extension (Mac and
Windows).
LCD display
signal input/output
(RJ45)
DMX in/out
(3 and 5 pins)
bracket
horizontal
alignment bracket
fuse holder
vertical
attachment
bracket
Neutrik powerCON
in/out
