Luxibel LX120, User Manual

Page: 6 / 11

LX120
V. 05 – 23/07/2014 6 ©Velleman nv
9.1 Using the Control Panel
Access the control panel functions using the four panel buttons located near the display.
Button Function
<MENU> used to access the menu or to return to a previous menu option
<UP> scrolls through the menu options in ascending order
<DOWN> scrolls through the menu options in descending order
<ENTER> used to select and store the current menu or option within the menu
 The control panel display shows the menu items you select from the menu map. When a menu function is
selected, the display will show immediately the first available option for the selected menu function. To
select a menu item, press <ENTER>.
 Use the <UP> and <DOWN> buttons to navigate the menu map and menu options. Press <ENTER> to
access the menu function currently displayed or to enable a menu option. To return to the previous option
or menu without changing the value, press the <MENU> button.
9.2 Menu options
Menu level 1 Menu level 2 Menu
level 3 Function
Auto Show Auto 0 to 8 Speed 0 to
100 9 built-in programs.
Speed 0 to
100
Static Dimmer 0-255 Sets the dimmer strength
Strobe 0-255 Sets the strobe frequency
Dimmer Mode Off Sets the dimming mode
Dimmer 1
Dimmer 2
Dimmer 3
Back Lite On Sets the time the panel remains on
10S (always on to 30 seconds)
20S
30S
Information Auto Test Sets the device in test mode
Press Enter again to exit test mode
Fixture Hours Shows number of working hours
Version Shows software version
IP Address Shows device's IP address
Device ID Shows device's ID number
DMX Address 1-508 Sets DMX address or Kling-Net/Art-
Net start channel
DMX Channel 5Ch Sets 5 channel mode (1-508)
49Ch Sets 49 channel mode (1-464)
54Ch Sets 54 channel mode (1-459)
Master/Slave Master Sets Master mode
Slave Sets Slave mode
Temperature Shows the device temperature
Ethernet Setting Protocol Sets protocol to Art-Net or Kling-Net