28
Installation All Island Hoods
4:
Before you go any further
assemble the glass (applicable
to glass units only) over the
main body of your hood and
secure with screws and
washers (provided).
Do not over tighten these
screws as you may cause the
glass to shatter.
5:
Insert the top stainless steel
chimney section into the bottom
stainless steel section; take care
not to force this as you may
cause damage.
6:
Lift the whole unit up onto the
main pre fixed upper inner arm,
slide it up or down to correct
height, make sure that you have
allowed the minimum height
above your hob unit.
