17
Fitting Instructions Applies To All Chimney Wall Hoods
4
Mark the height and position of your
ducting hole; this should be a
minimum distance from top o the
hood to the center of your hole
400mm, (see page 11).
Remove the hood of the wall before
drilling the ducting position; this will
stop any debris from falling into the
fan housing and avoid any damage.
5
Mark the height and position of your
fused spur socket position this so it’s
accessible, this should also be fused
with a 13amp fuse.
Remove the hood of the wall before
drilling for the electrics.
6
Remount the body section to the wall
and proceed to make all electrical and
ducting connections, make sure you
have complied with all safety
instructions as set out on page 3-11.
