18
Fitting Instructions Apply To All Wall Mounted Hoods
7
Once all electrical and ducting has
being connected and tested proceed
to assemble the chimney sections,
place the bottom part of the
chimney into the body of the hood,
no fixings are required as the
grooves secure this part, slide the
top section into the bottom section
of the chimney, taking care not to
scratch this as you do so.
The vented top section can be
turned upside down if the hood is
ducted outside, this will hide the
vents that are unnecessary for
ducted out use. See page 12 for
more details on vented or
recirculated options.
8
Slide the top section into place over
the wall bracket, take care not to
scratch this as you do so, and secure
the top section to the bracket with
the two short screws provided.
Your new hood is now ready for
use.
Warning
Do not attempt to clean down your
new hood until you have read the
cleaning instructions on pages 41
and 42. Careless cleaning could bur
and scratch your new hood.
