9
Cleaning
Cleaning overview
Regularly and according to the operating condi-
tions
Troubleshooting
What to do when something doesn’t work…
In many cases, small defects can lead to a malfunc-
tion. You will usually be able to deal with these your-
self. Please refer to the table below before contact-
ing your dealer. This may save you a lot of effort and
quite often money.
If you are unable to eliminate the error yourself,
please contact your dealer directly. Please remem-
ber that repairs carried out by non-professionals will
invalidate your warranty claim and may cause addi-
tional costs.
Preparing for disposal
Removing the battery
At the end of the device lifetime, you should remove
all batteries before disposing of the item.
– To remove the batteries from the unit, operate
the on/off switch (8) until the batteries are fully
discharged.
– Remove the shaft circlip (13).
– Pull the torque controller (2) to the front.
– Remove the screws on the housing and remove
the housing shell.
– Separate the connections on the batteries and
remove.
– Dispose of the batteries in accordance with the
regulations.
Disposal
Disposal of the appliance
Appliances which are labelled with the adja-
cent symbol must not be disposed of in
household waste. You must dispose of such
old electrical and electronic equipment sep-
arately.
– Please check with your local authority about the
possibilities for correct disposal.
Through separate disposal you send old equipment
for recycling or for other forms of re-use. You will
thus help to avoid in some cases that damaging
material gets into the environment.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for
recycling.
Disposal of batteries and accumulators
Disused batteries and accumulators do not
belong in domestic refuse; they must be dis-
posed of as prescribed by regulations.
– Bring batteries which are no longer usa-
ble to the battery collection point of the dealer or
of your local authority.
– Do not burn accumulators. Risk of explosion!
Technical data
What?
How?
Clean the ventilation slots
of the motor to remove
dust.
Use a vacuum, cleaning
brush or paint brush.
Clean the device.
Wipe the unit with a damp
cloth.
DANGER! Exercise caution – risk of
injury!
Unprofessional repairs may mean
that your unit will no longer operate safely.
This endangers you and your environment.
Error/Fault
Cause
Remedy
Device does not work.
Is the device defective?
Contact your dealer.
Battery pack discharged?
Charging the battery pack – p. 8.
Battery pack defective?
Contact your dealer.
Tool holder does not turn.
Is the rotation direction switch set
to the centre setting?
Changing the rotation direction – p. 8.
Part number
301 319
Battery-powered screwdriver
Idle revolutions
200 min
-1
Max. torque
3 Nm
Tool holder
6,35 mm
(¼")
Power supply
Rated voltage
230 V~, 50 Hz
Charge voltage
6 V
Charge current
300 mA
Protection class
II
Battery pack
Battery pack type
Li-Ion
Rated voltage
3,6 V
Capacity
1300 mAh
Charging time
3–5 h
GB
Akkuschrauber_301319.book Seite 9 Mittwoch, 16. September 2015 10:55 10
Summary of Contents for ABS-3,6Li A
