Lux Tools ABS-3,6Li A, Original Instructions Manual

Page: 5 / 20

5
Original instructions Battery-powered screwdriver
Table of contents
Before you begin… . . . . . . . . . . . . . . . . . . . . . . . 5
For your safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Your unit at a glance . . . . . . . . . . . . . . . . . . . . . . 8
Using for the first time . . . . . . . . . . . . . . . . . . . . 8
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Preparing for disposal . . . . . . . . . . . . . . . . . . . . 9
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Before you begin…
Intended use
This device is intended for for fastening and remov-
ing screws.
This product is not intended for commercial use.
Generally acknowledged accident prevention regu-
lations and enclosed safety instructions must be
observed.
Only perform work described in these instructions for
use. Any other use is improper. The manufacturer will
not assume responsibility for damage resulting from
such use.
What are the meanings of the symbols used?
Danger notices and information are clearly marked
throughout these instructions for use. The following
symbols are used:
For your safety
General safety instructions
• To operate this device safely, the user must have
read and understood these instructions for use
before using the device for the first time.
• If you sell or pass the device on, you must also
hand over these operating instructions.
General power tool safety warnings
• Save all warnings and instructions for future
reference. The term power tool in the warnings
refers to your mains operated (corded) power
tool or battery operated (cordless) power tool.
Work area safety
• Keep work area clean and well lit. Cluttered
and dark areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools
create sparks which may ignite the dust or
fumes.
• Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
• Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded)
power tools.
Unmodified plugs and matching
outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of elec-
tric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will
increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts.
Damaged or entangled
cords increase the risk of electric shock.
• When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
• If operating a power tools in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
Use of an RCD
reduces the risk of electric shock.
Personal safety
• Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or med-
ication.
A moment of inattention while operating
power tools may result in serious personal injury.
• Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the
switch is in the off-position before connect-
ing to power source and/or battery pack,
picking up or carrying the tool.
Carrying
power tools with your finger on the switch or
energizing power tools that have the switch on
invites accidents.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool
may result in personal injury.
DANGER! Direct danger to life and risk
of injury!
Directly dangerous situation that
may lead to death or severe injuries.
WARNING! Probable danger to life and
risk of injury!
Generally dangerous situa-
tion that may lead to death or severe inju-
ries.
CAUTION! Possible risk of injury! Dan-
gerous situation that may lead to injuries.
NOTICE! Risk of damage to the device!
Situation that may lead to property dam-
age.
Note: Information to help you reach a bet-
ter understanding of the processes
involved.
WARNING! Read all safety warnings and
all instructions.
Failure to follow the warn-
ings and instructions may result in electric
shock, fire and/or serious injury.
GB
Akkuschrauber_301319.book Seite 5 Mittwoch, 16. September 2015 10:55 10