User Manual LOCC-Box-Net, LOCC-Pads
24
LOCC-Box-Net_1.61_HB_EN
Ø
Status Output
The status output is suitable for the error recording and
can be parameterized for two operating modes. The High
level is available if the output is switched on. The status
changes to low if the output is switched off by overload or
short circuit. The additional mode for changes to low is
the pushbutton, remote input or the software. (Default, as
standard type 716401)
Ø
Remote Input
The remote input provides 5 adjustments for switching
the modules on/off. This is possible by adjusting the
impulse length or the level.
The impulse length on/off corresponds the default
setting.(716400, 716401, 716410)
Ø
Switch ON Characteristic
This adjustment describes the status after switching on
the power supply. The default adjustment is the last state.
By clicking the button Request the current adjustments
are displayed. By clicking Set the settings are send on
the LOCC-Box. By clicking Default the default values will
be write in the LOCC-Box.
3.5.9 Extra / LOCC-Box Info
LOCC-Box Info provides the import of comments. A
description how to change comments can be found in
chapter 3.5.1. For the import a CSV file with any name
is needed.
