User Manual LOCC-Box, LOCC-Pads
LOCC-Box-Net_1.61_HB_EN
17
9. Installation
All adjustments are displayed. Click Install to
start the installation. Click Back if you wish to
modify your adjustments.
10. Device driver installation
11. End
Mark the checkbox Launch LOCC Pads to
start LOCC Pads after installation. Click
Finish to complete the installation.
3.3 USB connection
The picture shows the connection between LOCC-Box-Net and a computer via the USB connection.
The follow example show the gateway 716459 (CANopen). The connection to other gateway is similar
– see the relevant the relevant user manual. The USB cable is in the gateway scope of delivery.
Please make sure that the software LOCC-Pads is already installed!
