Lutz B70H Translation Of The Original Instructions Download

Page: 4 / 24

0698-451 B70H - 07/2020

1.4 Warnings and symbols

Warning

Level of risk

Consequences in case of

non-compliance

DANGER

direct danger

death or serious injury

WARNING

possible direct danger

death or serious injury

CAUTION

possible dangerous situation

light injury

NOTICE

possible dangerous situation

damage of property

Tab. 3: Warnings and consequences in case of non-compliance

Symbol

Meaning

Safety information

►

Comply with all measures that are marked with a safety sign to prevent injuries or

death.

Information / Recommendation

►

What to do

→

Cross reference

Requirement

Tab. 4: Symbols and meaning

1.5 Latest state

Please find the latest state of this operating instruction under www.lutz-pumpen.de.

1.6 Copyright

The content of this operating instruction and the images contained in them are subject to the copyright

protection of Lutz Pumpen GmbH.

Summary of Contents for B70H

























Search results

Summary of Contents for B70H

Reviews:

Related manuals for B70H

Brands by name

Popular brands

Lutz B70H, Translation Of The Original Instructions

Search results

Summary of Contents for B70H

Reviews:

Related manuals for B70H

Brands by name

Popular brands