![background image](http://html1.mh-extra.com/html/lutron-electronics/seetouch-sg-2w/seetouch-sg-2w_manual_1951076004.webp)
4
1 2 3 4
1 2 3 4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Installation Instructions
Occupant Copy
Installation
Warning:
Always turn Off the circuit breaker/MCB or
remove the main fuse from the power line before
doing any work. Failure to do so can result in serious
personal injury.
5. Address Wallstations.
Each Wallstation
in a system must be assigned a
unique address.
Set DIP switches 1—4
of each Wallstation to one of the positions
illustrated below and record its location.
1
2
3
4
Set
Address
3/8 in. (10 mm)
For this address
Set switches
Set Switches
like this:
Location:
like this:
Location:
10
Set
Backlight
6. Backlight Option. Your Wallstation is
factory set for the backlight to be On.
The backlight can be switched on or
off by setting DIP switch 10.
4. Remove the faceplate, adapter (if applicable), and button
assembly from the Wallstation to access DIP switches.
1. Turn power Off.
Proper wiring of Wallstations is dependent upon the
GRAFIK
Eye
Control System that is providing power.
GRAFIK Eye
3000
Series and
GRAFIK Eye
4000 Series Control Units have different
power limitations and wiring techniques. Please confirm the
type of Control Unit to which the Wallstation is being wired and
use the corresponding instructions that follow.
3. Strip insulation from wires so that 3/8 in. (10 mm) of bare
wire is exposed for #18 AWG (1.0 mm
2
) wire.
2. Mount standard U.S. 1-gang wallbox, 2.75 in. (70 mm)
deep (available from Lutron P/N 241-519).
030747b 8/28/02 10:12 AM Page 4