6
Installation Instructions
Occupant Copy
System Communications
Communication between Wallstation and Control Unit must be established prior to normal operation. Follow these steps:
1.
Put the Wallstation in setup mode
(only one Wallstation can be in setup mode at a time).
Press and hold the buttons indicated (see examples below) for about 3 seconds, until the LED(s) start cycling.
Note: SG-3WD
can control 2 separate groups of window treatment zones. Only ONE (1) set of button controls can be in setup mode
at a time.
Press and
hold here for
setup mode
LEDs cycle
Press and
hold here for
setup mode
Press and
hold here for
setup mode
SG - 2W
SG - 3W
SG - 3WRL
LEDs cycle
LEDs cycle
Press and
hold here for
setup mode
Press and hold
here for setup
mode (Group 2)
Press and hold
here for setup
mode (Group 1)
SG - 5WRL
SG - 3WD
LEDs cycle
LEDs cycle
030747b 8/28/02 10:12 AM Page 6
