background image

Lutron Electronics Co., Inc.
Made and printed in U.S.A.
P/N 030-747 Rev.B  6/02

Internet: 

www.lutron.com

E-mail: 

[email protected]

WORLD HEADQUARTERS

Lutron Electronics Co. Inc.,

TOLL FREE:

(800) 523-9466

(U.S.A., Canada, Caribbean)
Tel: (610) 282-3800;
International 1- 610-282-3800
Fax: (610) 282-3090;
International 1-610-282-3090

ASIAN HEADQUARTERS

Lutron Asuka Co, Ltd.,

TOLL FREE

: (0120) 083417 (Japan)

Tel: (03) 5405-7333;
International 81-3-5405-7333
Fax: (03) 5405-7496;
International 81-3-5405-7496

EUROPEAN HEADQUARTERS

Lutron EA Ltd.,

FREEPHONE

: 0800 282107 (U.K.)

Tel: (207) 702-0657;
International 44-171-702-0657
Fax: (207) 480-6899;
International 44-171-480-6899

HONG KONG SALES OFFICE

Lutron GL  (Hong Kong)
Tel: 2104-7733;
International 852-2104-7733
Fax: 2104-7633;
International 852-2104-7633

SINGAPORE

Lutron GL (Singapore)
Tel: 65 220 4666
Fax: 65 220 4333

LIMITED WARRANTY

Lutron will, at its option, repair or replace any unit that is defective in materials or
manufacture within one year after purchase. For warranty service, return unit to place of
purchase or mail to Lutron at 7200 Suter Rd., Coopersburg, PA 18036-1299, postage pre-
paid.

This warranty is in lieu of all other express warranties, and the implied
warranty of merchantability is limited to one year from purchase. This
warranty does not cover the cost of installation, removal, or reinstallation, or
damage resulting from misuse, abuse, or improper or incorrect repair, or
damage from improper wiring or installation. This warranty does not cover
incidental or consequential damages. Lutron’s liability on any claim for
damages arising out of or in connection with the manufacture, sale,
installation, delivery, or use of the unit shall never exceed the purchase price
of the unit.

This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state. Some states do not allow limitations on how long an implied warranty
lasts, so the above limitation may not apply to you. Some states do not allow the exclusion
or limitation of incidental or consequential damages, so the above limitation or exclusion
may not apply to you.

These products may be covered under one or more of the following U.S. patents:
4,835,343; 4,924,349;  DES 422,567; DES 436,930; D453,742; D456,783 and
corresponding foreign patents, other patents pending.
Lutron, GRAFIK Eye, and Sivoia are registered trademarks, and seeTouch is a trademark of
Lutron Electronics Co., Inc. 
NFPA, National Electric Code, and NEC are registered trademarkds of the National Fire
Protection Association, Inc., Quincy, Massachusetts.
© 2002 Lutron Electronics Co., Inc.

Sivoia

Motorized Window Treatment Preset Programming (SG-5WRL only)

Preset 1, 2, and 3 are programmable 

Sivoia

presets. Preset positions are stored in the 

Sivoia

Motorized Window Treatments. All

GRAFIK Eye

Control Units and 

Sivoia

keypads/IR transmitters command the 

Sivoia

Motorized Window Treatments to travel to the same

set of presets. 

GRAFIK Eye Sivoia

Controllers are needed for operation of 

Sivoia

Motorized Window Treatments from Window Treatment

Wallstations. Communication between Wallstation, Control Unit, and 

Sivoia

Controller must be established prior to programming the

presets. Follow these steps:

1.

Adjust the window treatments to the desired position. 

To adjust window treatments individually, use the Open/Close

buttons on the 

Sivoia

Motor Drive Unit. To adjust all window treatments simultaneously, use the Raise/Lower buttons on the

Wallstation or 

Sivoia

Controller.

2.

Press and hold the desired preset button for a minimum of 4 seconds.

‘PR’ will flash on the Motor Drive Unit display

and the button LED will flash on the Wallstation indicating that the preset has been saved.

Note:

This preset change will affect all 

Sivoia

window treatment zones that are programmed to communicate with the SG-5WRL.

030747b  8/28/02  10:12 AM  Page 8

Summary of Contents for seeTouch SG-2W









Reviews: