Cisco Catalist 3850 Series Configuring Network Settings Download

Page: 1 / 32

Configuring VLANs

•

Finding Feature Information, page 1

•

Prerequisites for VLANs, page 1

•

Restrictions for VLANs, page 2

•

Information About VLANs, page 2

•

How to Configure VLANs, page 10

•

Monitoring VLANs, page 26

•

Troubleshooting VLANs, page 28

•

Where to Go Next, page 29

•

Additional References, page 30

•

Feature Information for VLANs, page 32

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to

http://www.cisco.com/go/cfn

. An account on Cisco.com is not

required.

Prerequisites for VLANs

The following are prerequisites and considerations for configuring VLANs:

•

Before you create VLANs, you must decide whether to use VLAN Trunking Protocol (VTP) to maintain
global VLAN configuration for your network.

Consolidated Platform Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3850 Switches)

OL-29322-01

Summary of Contents for Catalist 3850 Series

































Search results

Summary of Contents for Catalist 3850 Series

Reviews:

Related manuals for Catalist 3850 Series

Brands by name

Popular brands

Cisco Catalist 3850 Series, Configuring Network Settings

Search results

Summary of Contents for Catalist 3850 Series

Reviews:

Related manuals for Catalist 3850 Series

Brands by name

Popular brands