4
switching on the tool
waRning!:
Before switching the tool on, check
that the saw blade is properly fitted and runs
smoothly, and that the blade cap screw is well
tightened.
Connect the 120V plug to the power supply. The
LED power-on light (C) Fig.6 will turn on until the
tool is disconnected from the power supply.
Push the lock-off button (A) Fig.6 forward with the
forefinger, depress the ON/OFF trigger (B) firmly
and keep it pressed.
Once you release the trigger, the main switch
returns automatically to its initial position and the
tool turns off.
waRning!:
The saw blade continues to rotate
after the tool is switched off.
Releasing the plunge stop
Press the plunge lock button (A) Fig.7 downwards
and keep it pressed.
NOTE: Pressing the plunge lock button unlocks
the plunge cut mechanism, so that the motor can
be moved downwards. The saw blade emerges
below the base of the tool.
setting the edge guide
Unscrew the edge guide lock knob (A) Fig.8 on
the base plate (B).
Slide the edge guide (C) in the slots (D).
Set a desired width and retighten the edge guide
lock knob (A).
Figure 6
Figure 7
Figure 8
ASSEMBLY & OPERATION
Summary of Contents for 7663L
Page 9: ......
