5
laser guide
waRning!:
Do not stare directly at the laser
beam, do not deliberately aim the beam at
personnel and ensure that it is not directed
towards the eye of a person for longer than 0.25s.
When you make a cut line on your workpiece,
the laser can help you get better alignment.
turn on:
Press the laser switch (A) Fig.9 to the
“I” position. Line the laser up with the cut line on
your workpiece.
turn off:
Press the switch (A) to “O” position.
In addition, a V-shaped notch (B) Fig.9 at the
front of base and a protruding pointer (C) at the
rear allow the user to accurately align the cutting
mark on the workpiece.
dust extraction
This mini plunge saw is a powerful tool capable
of producing a large amount of dust. As the tool
has a fully enclosed blade, forced dust extraction
is particularly efficient. Forced dust extraction
should be used for all but small trimming jobs.
Push the dust extraction hose (A) Fig.10 onto the
dust extraction nozzle (B).
The dust extraction hose can be adapted to King
Wet-Dry Vacuums or others having a 1-1/4” hose
diameter as shown in Fig.10.
Figure 9
Figure 10
ASSEMBLY & OPERATION
Summary of Contents for 7663L
Page 9: ......
