Lutool 7663L Instruction Manual Download Page 3

Page: 3 / 9

speciFications

Model ........................................................................................................................

7663

Rated power

................................................................................................................

600W

Voltage.................................................................................................................2

-240

Frequency

................................................................................................

..................

0Hz

No load speed (RPM) ................................................................................................5,500

Blade diameter ........................................................................................................

150mm

Arbor size..................................................................................................................10mm

Max cutting depth ...................................................................................................

28.5mm

1. Hex. key holder

2. Power on light

3. Cutting depth scale

4. Plunge actuator

5. Laser guide housing

6. Flexible dust extraction hose

7. Edge guide lock knob

8. Edge guide

9. Retractable blade guard

10. Cutting depth setting clamp

11. Trigger

12. Segment diamond blade- cuts

ceramic tiles

13. HSS blade- cuts aluminum and

sheet metal

14. Universal TCT blade- cuts wood, plastic

15. Blade changing hex. key

This mini plunge saw is primarily intended for the sawing, longitudinally and trans-

versely, of solid wood, chipboard, plywood, plastic, aluminum, tiles and stone held in a

fixed position. Please note that the TCT blade pre-installed in the saw is intended for

wood only. Any other usage or modification to the device shall be considered as

incorrect use and could give rise to considerable dangers. Not suitable for commercial

use.

GETTING TO KNOW YOUR MINI PLUNGE SAW

Summary of Contents for 7663L










Search results

Summary of Contents for 7663L

Reviews:

Related manuals for 7663L

Brands by name

Popular brands

Lutool 7663L, Instruction Manual

Search results

Summary of Contents for 7663L

Reviews:

Related manuals for 7663L

Brands by name

Popular brands