Lust SMARTDRIVE VF1000 M Series, Operation Manual

Page: 7 / 78

A-5
A.1 Safety instructions
While in operation, inverters may have live, uninsulated, also if required
moving or rotating parts as well as hot surfaces, depending on the degree
to which they are protected. This means that a frequency inverter drive is
a source of potentially fatal injuries.
To prevent serious physical injuries or considerable material damage,
only qualified persons familiar with electrical drive equipment may work
on the device. Only those persons who are familiar with mounting,
installing, commissioning and operating inverters and have appropriate
qualifications shall be regarded as qualified. These persons must read
the Operation Manual carefully before installation and commissioning and
follow the safety instructions.
In this connection, the Standards IEC 364 and CENELEC HD 384 or
DIN VDE 0100 and IEC-Report 664 or VDE 0110 and national accident
prevention provisions or VBG 4 must be respectively observed.
Repairs to the equipment may only be carried out by the manufacture or
by authorized workshops. Unauthorized opening and unprofessional
intervention can result in physical injury or material damage.
A.2 Intended use
Inverters are components that are intended for installation in electrical
systems or machines. They should be basically only used for installation
in control cabinets.
When installed in machines, the inverter may not be commissioned (i.e. it
may not be put to its intended use) until such time as it is established that
the machine corresponds to the provisions of the EC Directive 89/392/
EEC (Machine Directive), EN60204 should be observed.
In addition to the Directive on Low Potential 73/23/EEC the harmonized
standards of the Series prEN 50178/DIN VDE 0160 in conjunction with
EN 60439-1/DIN VDE 0660 Part 500 and EN 60146/DIN VDE 0558 are
applied with regard to inverters.
The technical data and the information concering conditions of connection
can be taken from the type plate and the documentation and are to be
adhered to under all circumstances.