47
Betty R
Deut
sc
h
Engli
sh
Troubleshooting
8
Even after charging only
the 20% LED will light up
at the Smartcore battery.
The indicator was reseted.
Discharge the battery with
your light and fully charge it
afterwards.
Extremely discharged battery.
Cause
Solution
Problem
Charge the battery.
The light does not come on
and the power LEDs do not
flash when the battery is
plugged into the lamp.
Faulty LED unit.
With the battery plugged in,
the power LEDs do not come
on, but the PCS LEDs flash.
The Power LEDs do not stay on for
as long as they should.
Discharged battery.
Old battery.
Very low ambient
temperature.
Faulty charger.
Unsuitable battery.
Replace the LED unit.
Charge battery.
Replace battery.
Keep battery warm.
Replace charger.
Use original Lupine battery.
The lamp does not recognize
the transmitter.
Lamphead and transmitter are
not linked.
See chapter operation
remote control.
The transmitter does not light up
while pressing the button and the
lamp does not react.
Button cell empty or wrong
side up.
See chapter operation
remote control.
Check all plug contacts.
Battery not plugged into the
light or not plugged in properly.
