27
Betty R
Deut
sc
h
Engli
sh
1
Read this manual before using
The light and charger are ready for use when delivered.
All you have to do is charge the battery
before using the product.
See charger manual
Safety advisories:
Carry a spare light with you at all times, as the product can potentially fail unexpectedly at any time.
Automatic cutoff BLUETOOTH:
If the lamphead is connected to the battery, without switching the light on, the Bluetooth module
will automatically deactivate after 2 hours. You now can NOT turn on the light via the Bluetooth remo-
te switch. Either press the lampheads switch, or reconnect the battery to start the Bluetooth module
or light.
Heat generation:
The light housing can heat up, despite the product’s passing resemblance to a flashlight. So make
sure that you always keep the light at a safe distance from any combustible or flammable materials.
However, quiescent operation (without cooling the light housing via airflow or the like) can be
carried out at any time and will not damage the product.
Important:
When the light is used in a stationary state, the light dims after a few minutes to reduce
the light's temperature. The light can only be used at 45 watts for long periods if air is flowing over
the housing.
Water resistance:
All Betty R components are waterproof and can of course be used under extremely severe conditions.
The lamp complies with IP protection class 68 but is NOT a diving lamp and is NOT suitable for use
under water.
Safety advisory:
Avoid looking directly into the light emitted by the light or shining
the light into your own eyes or the eyes of another person. If the light accidentally shines
into your eyes, close your eyes and move your head out of the light beam path. Do not
use any strongly focussing optical device to look at the light beam.
In cases where the light is used in a public or commercial setting, users should be
provided with training concerning the safety measures for laser light.
General:
