25
EN
Attaching modules to the control board
Interval OFF
Interval ON,
Fan runs every 4 hours for 30 min in regulated ventilation
Interval ON,
Fan runs every 2 hours for 15 min in regulated ventilation
Delay time OFF
Delay time ON,
Fan continues to run ?? for 15 min in regulated ventilation
Delay time ON,
Fan continues to run for 30 min in regulated ventilation
Switch-on delay OFF
Switch-on delay 120 s
Switch-on delay 45 s
Module attached to the control board
and assembled in the grille frame:
Control board
Module
Positioning bars
Grille frame
Remove the control board from the gril-
le frame by loosening the fixing screw.
Attach the module with the connector to
the control board.
Insert the control board with the atta-
ched module in the Grille frame.
Snap the module into the positioning
bars.
Affix the control board using the fixing
screw.
Push the antenna of the radio module
into the opening provided for this pur-
pose on the grille frame.
See also "Installation of the control
board in the grille frame" p.2
Recess to place
the antenna of
the radio module
Module
Attach module to the control board:
Control board
Connector
Humidity-temperatur sensor
(only with control board type
5/EC-FK)
