17
Technical specifications
EN
Check the delivery for completeness and mint condition
Filter
Front cover
Grille frame
Fan insert
clamp-in fan
incl. screws to fix the grille frame on the fan
insert
Seal (to be affixed when
exchanging Skalar-V...)
Mains supply terminal
Sound insulation
(not required with 2-room fans)
Sliding connection pipe with backdraft shutter (for
new construction)
Fixing element
Control board (is
supplied separately)
Connection cable with connector for
control board
Each Silvento ec can be combined with a control board without humidity sensor or with humidity board. Each control board can be
combined with one extension module.
This allows the following configuration options:
Silvento ec with basic control board without humidity sensor, with integrated delay time
Silvento ec with basic control board without humidity sensor, with integrated delay time and motion sensor module
Silvento ec with basic control board without humidity sensor, with integrated delay time and radio sensor module
Silvento ec with basic control board with humidity sensor, with integrated delay time
Silvento ec with basic control board with humidity sensor, with integrated delay time and motion sensor module
Silvento ec with basic control board with humidity sensor, with integrated delay time and radio sensor module
All devices are equipped with filters of the class G2 and a filter replacement indicator.
Ventilation devices of the series „Silvento“ meet all requirements of:
- DIN 18017-3
- for low voltage (CE) according to EC Directives (2006/95/EG; 2014/35/EU)
- for electromagnetic compatibility (CE) according to EC Directives (2004/108/EG; 2014/30/EU)
Power supply:
200 - 240 V AC 50 Hz
Remote control input:
0 - 10V DC
Protection class:
II
Protection type: IPX5
Airflow volume:
OFF, 15 - 60 m³/h
(with active humidity control „quasi“-stageless between 15 and
60 m³/h)
Electrical power consumption:
1,8 - 6,2 W
Sound pressure level:
22 - 35 dB(A)
Shipping unit
