23
EN
6
Assembly: Decor screen
Connect control board to control (see
below)
Fasten and align the grille frame at the
fan insert using the screws provided
Insert filter
Fit front cover and snap it into place
Attention:
The grille frame should
always be assembled according to the
installation position of the fan! The front
cover can then be assembled on the
grille frame in any one of two positions
rotated by 180°.
Possible installation positi-
ons of the decor screen
Rotation by 180°
Position of the control
in the fan
Connecting the control board to the
control
Assemble fan insert, insert sound insu-
lation
Clear snap-on or screw openings in the
grille frame
Plug in the cable for the control board,
the coupling for the cable plug is lo-
cated in a recess on the reverse side of
the grille frame
Snap grille frame into place or screw it
on and position the cable beneath the
control board (do not jam the cable)
Fit the front cover and snap it into place
Note: The LED at the control board
flashes once after the mains supply
has been connected to the completed
ventilation device.
Connect the control board:
Control board connected:
Coupling
Plug
Control board connected and cable
for control board correctly inserted:
Control board
Front cover
Grille frame
Connector with
coupling
Cable for control board
Control board
7
Grille frame
Filter
Front cover
