Lunos Nexxt, Installation Manual, Page: 38 / 54

38
EN
Guide the mains cable (and the
control line) into the wall installa-
tion housing through the rear
-
side cable - support sleeve.
For this purpose, take the mains
connection circuit board from the
wall installation housing and
return it after completed mains
connection.
Fix the wall installation housing
together on the wall with the
attached surface
-
mounting set!
Ensure in this case that the elec-
trical flap close
- off is fitted exact-
ly into the wall installation pipe!
Connect the mains cable (and
the control line).
For electrical connection, see
chapter "Electrical connection
-
wiring diagrams".
Caution! All assembly work
on the ventilation device
may be implemented only
with all
- pole disconnected
mains voltage!