Lunos Nexxt, Installation Manual, Page: 31 / 54

31
Installation position
Temperature application range: - 15°C to 40°C +
Can be used with a relative air humidity level up to 65% in the indoor area. Small build - ups of con-
densation during the heating season can be possible. In case of exceeding the employment limits,
switch off the device and close off inside screen. Ensure a fresh air supply through window ventila-
tion.
Condensate could occur, can drain and does not remain in the unit. In the wintertime please ensure
that there is no ice on the footpath under the outer hood and forming icicles will be be removed or be
assured that no one will be injured by falling objects.
Mount the ventilation device with
a recommended lateral minimum
separation distance of 30 cm and
a recommended minimum separa-
tion distance of 15 cm above and
below.
The side separation distance
serves to ensure the ventilation
function, the separation distance
above and below the assembly
freedom
.
We recommend to install the de-
vice at an altitude of 1,50 meters
to ensure a user
- friendly opera-
ting.
Installation features
•
The ventilation device must be installed indoors vertically on an external wall.
•
Only one installation position is possible and this should indicate air ports to the right and left
above.
•
The ventilation device must always be freely accessible for operation and maintenance, the
air ports may not be built over, adjusted or covered
•
In case of retrofit installation, make sure that there are no supply lines lie (e.g. gas, water,
current) in the area of the wall break
- through
•
Make sure that the wall break
-
through corresponds to the local requirements, as appropriate
pull in a lintle
Area of application
Technical data EN
Device voltage: 230 V AC 50 Hz
Control voltage: 1 - 10 V DC SELV
Electrical power consumption: 5,7
-
40/46,5 W
Protection type: IP 22
Volume flow: 15
-
90/115 m³/h
Window
min. 15 cm
min.
30 cm