Lunos Comfort Control TAC, Operating Instructions Manual

Page: 30 / 56

30
2.6. System Settings
System settings may be required for installation and commissioning of the TAC. In this menu, for examp-
le, the so-called configuration code of the TAC can be entered.
If landlord protection is activated, the menu scope is reduced and, as a result, also the setting options
available. This ensures minimum ventilation defined by the landlord.
If you activate the landlord protection you will be requested to enter a four-digit password. You will need
this for subsequent deactivation.
If the password is no longer available, please contact us.
Note: If you are not satisfied with manually actuated settings and are not able to restore the required
functions, you can reset to factory settings, i.e. to the settings of the original configuration code at any
time via ‚Settings‘, or use the mechanical ‚Reset‘ button on the bottom side of the TAC
If you use the ‚Reset‘ button, your previously stored manual changes remain unaffected (except for the
rapid access functions).