104
Climate Control
The AC button is displayed when a
Truma Aventa Comfort air-
conditioning unit is connected to the
Alde control panel. This allows fully
automatic climate control, with the
heating and air-conditioning working
in unison.
•
Select the desired room temperature as
normal.
•
Press the AC button. Green is on, blue is
off. The heating and air-conditioning will
actively maintain the desired room
temperature.
Alde recommends using the 3010-346 discrete
room temperature sensor for accurate climate
control. It should be located where the heating
and air-con have a balanced effect on
temperature.
SHUTTING DOWN THE SYSTEM
To save energy, the control panel only
updates the boiler after the last adjustment is
made. Wait 10 secs before shutting down the
system to ensure the boiler is updated.
1.
Press the Power button again. The screen
goes dark, the green LED is unlit. The
system is off.
SETTINGS
To learn more about the Settings Menu and
programmable features of your Alde heating
system, the complete operating instructions
can be downloaded from www.alde.co.uk.
To store programmable features between
sites, the optional Alde 3010-420 AA battery
backup is required.
SETUP
How you set up your system will depend on
what accessories are installed and your user
preferences. To get you started, here's how
to setup some of the more common features.
Restore default factory settings
Before using the system for the first time,
restore default factory settings. Your control
panel may have been tested by the dealer or
installer, and some settings may have been
changed unintentionally.
1.
Press Tool button to access the Settings
Menu (bottom right in Main Menu).
2.
Press down arrow, until Reset button is
displayed.
3.
Press the Reset button to proceed.
>
Setup 12V circulation pump in expansion
tank
To use the 12V circulation pump in the
expansion tank, you must set it up. This is
not a default factory setting. NB: This only
applies if you have the 12V circulation pump
in the expansion tank.
1.
Press Tool button to access the Settings
Menu (bottom right in Main Menu).
2.
Press down arrow, until Installed
Accessories button is displayed.
3.
Press the Installed Accessories button to
access the menu. Find and tick "Optional
Pump" by pressing the box. Next, find and
untick "Main Manual 12V".
>
>
ALDE HEATING - QUICK START GUIDE
Summary of Contents for ALARIA 2018
