3
1. SAFETY INSTRUCTIONS
Make sure that the installation of your lighting fixtures complies with
the regulations in force. In case of doubt, we advise you to call in a
professional.
SAFETY WARNING: When assembling and using the luminaire, the
power cable must not be pulled to the foot of the luminaire and must
not be adjusted along the structure of the luminaire. To avoid any risk
when adjusting the position of the luminaire, the power cable must
be released at the joints so as to allow bending without straining the
cable.
Keep out of reach of young children. Contact with the bulb could
cause severe burns.
Do not use the product if the cable is damaged.
Do not place near heat sources over 60°C.
The cable or flexible outer cord of this luminaire cannot be replaced;
if the cable is damaged, the luminaire must be destroyed.
This product contains an energy class G light source.
2. REPLACEMENT INSTRUCTIONS REPLACEABLE COMPONENTS
Unplug the luminaire before replacing the bulb.
Do not use a higher wattage bulb than indicated on the marking on
the product.
3. INSTALLATION INSTRUCTIONS
Before working on this luminaire, switch off the electrical circuit on
which you are going to work.
4. INSTRUCTIONS FOR USE
Be sure to use the product as described in the manual. Incorrect use
may damage the product or its environment.
This product is designed for indoor and outdoor use.
The connection to the mains must be made safely. The connection
must be protected against water.
This lamp has a pull switch on the shade.
For a longer service life, it is advisable to take the light in when not
in use.
5. MAINTENANCE INSTRUCTIONS
Always unplug the luminaire before cleaning it.
Clean the exterior parts only with a soft cloth.
6. TROUBLESHOOTING AND TECHNICAL SPECIFICATIONS
Do not dismantle the device yourself in the event of a fault. The
electrical parts of this appliance may only be disassembled by an
authorised person or by the manufacturer himself.
IP44
Supply voltage: 220-240V
Cable length 2 metres
Bulb supplied: E27 LED 10W 810lm 6000K
Contenido :
-
STANDY W150
- Instrucciones de uso
1. INSTRUCCIONES DE SEGURIDAD
Asegúrate de que la instalación de tus luminarias cumple con la
normativa vigente. En caso de duda, le aconsejamos que llame a un
profesional.
ADVERTENCIA DE SEGURIDAD: Durante el montaje y la utilización
de la luminaria, no se debe tirar del cable de alimentación hasta el
pie de la luminaria y no se debe ajustar a lo largo de la estructura
de la luminaria. Para evitar cualquier riesgo a la hora de ajustar la
posición de la luminaria, el cable de alimentación debe liberarse en
los empalmes de manera que se pueda doblar sin tensar el cable.
Mantener fuera del alcance de los niños pequeños. El contacto con la
bombilla podría causar quemaduras graves.
No utilice el producto si el cable está dañado.
No colocar cerca de fuentes de calor de más de 60°C.
El cable o cordón exterior flexible de esta luminaria no puede ser
sustituido; si el cable está dañado, la luminaria debe ser destruida.
Este producto contiene una fuente de luz de clase energética G.
