15
After Sales Support
Telephone: 1300 366 144
Internet: [email protected]
Cleaning the Appliance
• To clean the outside of the appliance, the filter compartments, the telescopic tube (P), the crevice nozzle (T)
and upholstery nozzle (S) as well as the dust container (A) use a dry, or at best damp, well wrung-out cloth.
• Then rub well until dry.
• Clean the exhaust air openings (in the protection cover) with s soft brush from time to time.
The handle on the suction hose can be removed to make cleaning easier. To do this, press the catches at the
top and bottom of the handle and pull the handle off of the suction hose.
Cleaning the floor nozzle
From time to time, use the crevice nozzle (T) to vacuum the underside of the floor nozzle (Q) .
Emptying the dust container
We recommend that you empty the dust container (A) after every use, but at least when the dust reaches the
“MAX” mark. Otherwise suction power will be lost.
• Press and hold release button (F).
• Pull the dust container (A) upwards at an angle and out of the appliance by the handle (E).
• Hold the dust container (A) over a dustbin.
• Press release button (D) on the dust container (A), as shown in image 08. The dust con-
tainer flap (C) of the dust container will fold down and the dust will come out.
• Tap carefully to remove any remaining dust residue.
• If you do not want to clean the filters for the dust container (A), you can now return the
dust container (A) to its place. To do this, proceed as follows:
• Close the dust container flap (C) and make sure that the dust container (A) has been as-
sembled correctly (see "Cleaning the coarse dust filter" on page 16).
• Hold the dust container (A) so that the filter opening is facing towards the appliance, as
shown in image 09.
• First push the dust container (A) downwards and then towards the appliance until you
hear and feel it snap into place.
D
Image 08
Image 09
