11
After Sales Support
Telephone: 1300 366 144
Internet: [email protected]
Using the correct Nozzle
Floor nozzle (Q)
This is the nozzle you will use most of the time, since it is suitable for large, flat surfaces. For best vacuuming
results, use the foot-operated switch (R) to adapt the appliance to the surface it is on:
• On shortpiled or smooth floors such as PVC, parquet or tiles, the brush and rubber
lip on the underside of the floor nozzle (Q) must be extended, i.e., press the ribbed
side of the foot-operated switch (R) down until you feel and hear it snap into place,
as shown in image 04.
• On longpiled carpets, the bruch and rubber lip should be retracted, i.e, press the
smooth side of the foot-operated switch (R) down. The foot-operated switch (R) can
also be changed over during operation, as shown in image 04.
Upholstery nozzle (S) (with brush attachment)
• This nozzle is suitable for gentle cleaning of picture doorframes, books, display
guards, lampshades etc.
• Simply by sliding back the brush attachment (in the direction of the arrow as
shown in image 05.) the upholstery nozzle (S) is ideal for vacuuming upholstery,
mattresses, etc..
Crevice nozzle (T)
• This nozzle is most suitable for vacuuming folds in fabric, joints, corners or alcoves.
R
Image 04
Image 05
Getting Started / Features
