background image

                                                                                                           

English - 

4  

 

Chapter 1 Precautions   

Always follow these safety instructions when setting up and using the Digital 
Presenter: 

1.  Do not place the Digital Presenter on an unstable trolley, stand or table. 
2.  Do not use the Digital Presenter near water or source of heat. 
3.  Use attachments only as recommended. 
4.  Use the type of power source indicated on the Digital Presenter. If you are 

not sure of the type of power available, consult your dealer or local electricity 
company for advice. 

5.  Place the Digital Presenter can be easily unplugged. 
6.  Always take the following precautions when handling the plug. Failure to do 

so may result in sparks or fire. 

„

  Ensure the plug is free of dust before inserting it into a socket. 

„

  Ensure that the plug is inserted into the socket securely. 

7.  Do not overload wall sockets, extensions leads or multi-way plug boards as 

this may cause fire or electric shock. 

8.  Do not place the Digital Presenter where the cord can be stepped on as this 

may result in fraying or damage to the lead or the plug. 

9.  Unplug the projector form the wall socket before cleaning. Use a damp cloth 

for cleaning. Do not use liquid or aerosol cleaners. 

10. Do not block the slots and openings in the projector case. They provide 

ventilation and prevent the Digital Presenter from overheating. Do not place 
the Digital Presenter on a sofa, rug or other soft surface or in a built-in 
installation unless proper ventilation is provided. 

11. Never push objects of any kind through cabinet slots. Never allow liquid of 

any kind to spill into the Digital Presenter. 

12. Except as specifically instructed in this User’s Manual, do not attempt to 

operate this product by yourself. Opening or removing covers may expose 
you to dangerous voltages and other hazards. Refer all servicing to licensed 
service personnel. 

13. Unplug the Digital Presenter during thunderstorms or if it is not going to be 

used for an extended period, do not place the Digital Presenter or remote 
control on top of beat-emitting equipment or heated objects such as a car 
and etc. 

14. In the following situations, unplug the Digital Presenter from the wall outlet 

and refer servicing to licensed service personnel: 

Summary of Contents for PS600


























Reviews: