Layer 1
Layer 2
Layer 3
Content
Point Color
Red / Green / Blue
Select the cursor’s color
Drawing Type Frame / Line
Video Format
Auto / NTSC / PAL
Language
English / Deutsch /
Francais / Italiano/
Eapanol /
Русский
/
/
Select your native language
Factory Reset Enter / Exit
Reset all default setting
Setting
Preset Save/load
Save/load setting
parameters
DHCP
Enable / Disable
Set DHCP (Dynamic Host
Configuration Protocol)
IP
Set IP address
Net Mask
Set Net Mask value
Advance
Gate Way
Set Gate Way value
The OSD menu is shown as below when the Input Source from PC
Layer 1
Layer 2
Content
Clock
Set the clock
Phase
Set the phase
H-Position
Set the image horizontal position
V-Position
Set the image vertical position
Brightness
Set the image brightness
Contrast
Set the image contrast
PC Input
Auto Image
Auto. set clock & Phase & Position & Brightness
& Contrast
English -
21